In this article, we will go over how to add a model to a Surgical Guide case.
We now offer model design along with your Implant planning and Surgical guides. To add the model option to your case, submit the case to the 3Shape Design Service Platform as you normally would:
Select the correct Design Type for your case (Tooth Supported 1-3, Tooth Supported 4+, Tissue Supported, or Bone Supported)
Enter the name of the patient or pan/chart number in the name field
Enter the brand of the implant and whether the guide should be fully guided or pilot guided
Click on the Teeth# button to select the sites where the implants should be placed
Click on the Modifier button to select a consultation if desired. There, you will also see a new option: Model for Implant Planning.
Click the drop-down arrow and select Model for Implant Planning, and close to add the model to the case:
Select the manufacturing destination
Click submit to send the case
Once the case design is complete, it will be returned to you for review, with all files available for your approval.
If you have any questions, our Customer Support team is here to help!
Email: designservices@3shape.com
Phone: +1 602-688-4133
Live Chat: Available Monday – Friday, 7:00 AM – 3:00 PM (MST)
International Support: +44 159-572-8586, Monday – Friday, 9:00 AM – 6:00 PM (CET)
We’re happy to assist you with any questions or concerns!